Once the security code function has been activated, "Security/SECURITY" disappears from the MENU system. Note that it will no longer be possible to cancel this function afterwards.
1Press the SRC button repeatedly to select the standby mode. "ALL OFF" is displayed when the standby mode is selected.
2Select the four digits to use in your security code.
NOTE
The
3Press the MENU button for at least one second. "MENU" is displayed and the menu mode is turned on.
4Keep pressing the FM button until the "Security/SECURITY" appears in the display.
Press the AM button to search in the other direction.
5Press either the 4 or ¢ button for at least two seconds. "ENTER" will appear in the display for one second, indicating the code setting mode has been entered. When "CODE" appears in the display, you can start inputting the code.
6Press the preset button and enter the security code that you have selected in step 2.
Example: Use "3510" as the security code.
Step | Button to press | # Times | Display | |
pressed | ||||
|
|
| ||
1 | #1 | 4 | “3” | |
2 | #2 | 6 | “5” | |
3 | #3 | 2 | “1” | |
4 | #4 | 1 | “0” |
7Press the DISP button for at least three seconds. The security code will be set.
"CODE" appears in the display, you can start inputting the code.
8Press the Preset button and input the security code again.
9Press the DISP button again for at least three seconds. "APPROVED" will appear in the display, with the security code function turning on. From this point on, if the unit is disconnected from the battery, the security code must be entered the first time that the unit's power is turned on. "ENTER" and "CODE" will appear in the display, asking you to input the code.
NOTE
If you input an incorrect security code, the code setting mode will be canceled automatically. Follow the steps from 5 to 9 above again.
If you press the RESET button or remove the battery:
The first time you turn the unit on again, "CODE" will appear in the display, asking you to input the security code.
Repeat steps 8 and 9 above, and input the security code. You can start operating the unit again when "APPROVED" appears in the display.
If you enter the incorrect code, the power will turn off. Enter the correct code to turn the unit on.
Function of the
Selectable Illumination
You can switch the color of the button illumination between green and red.
Display and setting:
"Color Green/COL GRN" : The color of the illumination is green.
"Color Red/COL RED" : The color of the illumination is red.