Kenwood General features, English, Function of the KDC-X615, Storing your sound settings

General features

English

Function of the KDC-X615

"HPF F" : Adjust the frequency of the High-pass filter for front output.

Setting values: Through / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz / 150Hz / 180Hz / 220Hz

NOTE

You can separately set the high-pass filter for front and rear output,including preouts.The high-pass filter works except during non-fading preout when switching to non-fading.The factory default settings for front output and rear output are "through" .

Function of the KDC-X615

"HPF R" : Adjust the frequency of the High-pass filter for rear output.

Setting values: Through / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz / 150Hz / 180Hz / 220Hz

NOTE

You can separately set the high-pass filter for front and rear output,including preouts. The high-pass filter works except during non-fading preout when switching to non-fading. The factory default settings for front output and rear output are "through" .

Function of the KDC-X615

"LPF NF" : Adjust the frequency of the Low-pass filter for Non- Fading output.

Setting values: 50 Hz / 80 Hz / 120 Hz / Through

NOTE

This mode is available only when the non-fading output function is set to on.

Function of the KDC-X615

"NF Phase" : Adjust the phase for Non-Fading output. Setting values: Normal (0°) / Reverse (180°)

NOTE

This mode is available only when the non-fading output function is set to on.

"V OFFSET/VOS" : Set the sound level of the each source selected by adjusting the level difference between the basic sound level and the required level.

Setting values: - 8 – ± 0

Function of the KDC-X615

Storing your sound settings:

Press a preset button (#1-6) for at least two seconds except during the bass center frequency, bass level, bass quality factor, bass extension, treble center frequency, and treble level adjust mode.

NOTE

•This setting can be made only when the Sound coordinate system is on. (page30)

•The settings you can preset are, bass center frequency, bass level, bass quality factor, bass extension, treble center frequency, and treble level.

— 10 —