Kenwood KDC-515S, KDC-6015 Mobile Preset, Loudness, Non-FadingOutput, Function of the KDC-X615

Function of the KDC-X615

Recalling your sound settings:

Press a preset button (#1-6) except during the bass center frequency, bass level, bass quality factor, bass extension, treble center frequency, and treble level adjust mode.

NOTE

This mode is available only when Sound coordinate system is on.

Function of the KDC-6015

Mobile Preset

This function allows you to adjust the setting that is recalled with the sound coordinate system, according to types of speakers.

1Press the SRC button repeatedly to select the standby mode. "ALL OFF" is displayed when the standby mode is selected.

2Press the AUD button to enter the mobile preset plan mode.

3Press either the 4 or ¢ button to select the type of speaker. The setting switches as follows.

Off / For the OEM speaker / For 6/6x9 in. speaker / For 5/4 in. speaker

4Press the AUD button to end the mobile preset plan mode.

NOTE

•When you change the setting of type of speaker, the bass and treble tone settings are returned to original levels.

•This mode is available only when the Sound coordinate system is on. (page30)

Loudness

This function amplifies low and high tones when the volume is turned down.

The LOUD indicator lights up when the loudness function is on.

Turning Loudness On/Off:

Press the LOUD button for at least one second to switch the loudness on and off.

Function of the KDC-X615

Non-Fading Output

You can turn the non-fading output on and off while the preout is switched to the non-fading preout.

Turning non-fading output On/Off :

Press the NF button for at least one second to set the function ON or OFF.

"NF ON" is displayed when the non-fading output is set ON.

— 11 —