Resetting a Custom Function File
1.Open the menu, select [CUSTOMIZE] and then select the [CUSTOM FUNCTION] submenu.
2.From the column on the left select the custom function file you want to reset.
3.From the bottom bar select [
RESET].
4.Select [OK], press the SELECT/SET dial and close the menu.
Activating a Custom Function File
Even if you define a custom function file, as long as you do not activate it, the camcorder will function according to default settings.
1.Open the menu, select [CUSTOMIZE] and then select the [CUSTOM FUNCTION] submenu.
2.From the column on the left select the custom function file you want to activate.
3.From the bottom bar select [
APPLY THIS SET].
4.Select [ACTIVE] and press the SELECT/SET dial.
will appear next to the custom function file currently activated.
Copying a Custom Function File to the Memory Card
1.Open the menu, select [CUSTOMIZE] and then select the [CUSTOM FUNCTION] submenu.
2.From the column on the left select the custom function file you want to copy to the memory card.
3.From the bottom bar select [
SAVE TO CARD].
4.Select the destination file on the memory card [
1] - [
3].
5.Select [OK], press the SELECT/SET dial and close the menu.
When the operation is finished, “TASK COMPLETED” will appear on the screen.
Reading a Custom Function File from the Memory Card
1.Open the menu, select [CUSTOMIZE] and then select the [CUSTOM FUNCTION] submenu.
2.From the column on the left select the custom function file to which you want to read the settings from the memory card.
3.From the bottom bar select [
READ FROM CARD].
4.Select the source file on the memory card [
1 
] - [
3 
].
5.Select [OK], press the SELECT/SET dial and close the menu.
When the operation is finished, “TASK COMPLETED” will appear on the screen.
Custom function files saved with a Canon XL H1S, XL H1A, XH G1 or XH A1 cannot be used with this camcorder.
98
