Reading a Custom Preset File from a Still Image
With the custom function [PHOTO BUTTON] ( 97) you can select to save the custom preset settings
currently in use along with a still image recorded in mode (simultaneous recording, 115). This is very useful when you want to load the custom preset file later by selecting the still image taken at a specific scene.
1. Select the still image that contains the custom preset file you want to read.
Use the + / – buttons to move between the still images. If a still image contains a custom preset
file, appears.
2.Open the menu, select [CUSTOMIZE] and then select [META DATA CP].
3.Select [ CARD CAMERA] from the column on the left.
4.From the bottom bar, select [ SELECT POSITION] and select the preset number under which you want to store the file on the camcorder.
5.Select [ EXECUTE] and in the confirmation screen select [EXECUTE] to load the file.
6.Close the menu.
Custom preset files 7 to 9 are predefined settings designed for specific scenes.
-These 3 custom preset files are protected and, as long as the protection is not removed, cannot be overwritten.
-Even if you deleted or changed the sample custom preset files, you can reset them to the original
values by resetting all the camcorder’s settings. Open the menu and select [SYSTEM SETUP/ ]. Select [RESET ALL] and select [YES] in the confirmation screen.
-After resetting custom preset files 1 to 6 with the [ RESET] option, they will all contain the same default settings.
Custom Preset [7 VIDEO.C] | For playback on a |
| [BLK] = [PRESS], [PED] = |
|
|
Custom Preset [8 CINE.V] | For playback on a monitor TV with a |
| [GAM] = [CINE1], [KNE] = [LOW], [BLK] = [STRETCH], [SHP] = |
| [CMX] = [CINE1], [CGN] = |
| [GBM] = |
|
|
Custom Preset [9 CINE.F] | For video transfer to film. |
| [GAM] = [CINE2], [KNE] = [LOW], [BLK] = [STRETCH], [SHP] = 6, |
| [CMX] = [CINE2], [RGN] = |
|
|
*All other settings are left at their neutral values.
Customization
93