
Connection to a Standard Definition TV or Monitor
1Using the HD/SD COMPONENT OUT or VIEWFINDER COMPONENT OUT Terminal
•Refer to the connection diagram in the previous section ( 80).
•Select the appropriate component video signal depending on the TV or monitor you connect.
Open the menu and select [SIGNAL SETUP]. Select [COMP.OUT], select a setting option and close the menu.
2Using the A/V1 or VIDEO 2 Terminal
•Refer to the connection diagram in the previous section ( 81).
•If connecting to a TV set with a 4:3 aspect ratio, change the [LETTERBOX] setting appropriately.
Open the menu and select [SIGNAL SETUP]. Select [LETTERBOX], set it to [ON] and close the menu.
We recommend powering the camcorder from a household power outlet.
TV sets equipped with the Video 34) will be played automatically in widescreen mode whether you connect the camcorder to the TV using the A/V1 terminal or VIDEO 2 terminal.
During fast forward playback, rewind playback and reverse playback of a tape recorded in HDV standard, the picture may be distorted.
82