Erasing Still images
You can erase still images one at a time or all at once.
Be careful when erasing still images. Erased still images cannot be recovered.
Erasing a still image that had a custom preset file embedded (recorded with the
[PHOTO + CP DATA] setting) will erase the still image and the embedded custom preset file.
Protected still images (
123) cannot be erased.
Erasing a Single Still Image
1.Select the still image you wish to erase.
2.Press the SELECT/SET dial to open the still image operations menu.
In 
mode, the menu appears when you press the dial while you are reviewing a still image, or immediately after recording a still image.
3.Select [
IMAGE ERASE].
4.Select [ERASE].
The image is erased and the previous image appears.
5. Select [
CLOSE] to close the menu.
Erasing All Images
MENU
(
27)
CARD OPERATIONS
ERASE ALL IMAGES
1.Open the menu and select [CARD OPERATIONS].
2.Select [ERASE ALL IMAGES].
3.Select [YES] and close the menu.
All still images except the protected ones are erased.
