Video Signal Output Standards
The standard of the video signal output from the HD/SD SDI ( 
only), HD/SD COMPONENT OUT and HDV/DV terminals depends on the standard used for recording (or the standard of the recording on the tape being played back) and on various menu settings. Video output from the VIEWFINDER COMPONENT OUT, A/V1, or VIDEO 2 terminal will always be in 480/60i standard.
Standard of Video Output while Recording
While recording in high definition, video output from the HD/SD SDI terminal will be an uncompressed HD, YPbPr signal. You can
Recording standard | HD/SD SDI terminal1 | HD/SD COMPONENT OUT terminal |
| ||||
|
| Down- |
|
| Down- | HDV/DV terminal | |
and frame rate | Unchanged |
| Unchanged |
| |||
| converted2, 5, 6 |
| converted3, 5 |
| |||
|
|
|
|
|
| ||
HD 60i | 1080/60i |
| 480/60i | 1080/60i |
| 480/60i | 1080/60i |
|
|
|
|
|
|
|
|
HD 30F | 1080/60i |
| 480/60i8 | 1080/60i |
| 480/60i8 | 1080/30p |
HD 24F | 1080/60i |
| 480/60i9,10 | 1080/60i |
| 480/60i9 | 1080/24p |
SD (60i, 30F8, 24F11) |
| 480/60i |
| 480/60i | 480/60i | ||
Standard of Video Output during Playback
When playing back a tape recorded in HDV standard, video output from the HD/SD SDI terminal will be a signal modified from the HDV video. You can
Standard of | [LETTERBOX] | HD/SD SDI terminal1 | HD/SD COMPONENT OUT terminal | HDV/DV terminal | ||||
| Down- |
| Down- |
| Down- | |||
the tape | setting | Unchanged | Unchanged | Unchanged | ||||
converted2, 5 | Converted3, 5 | Converted4, 7 | ||||||
|
|
|
|
| ||||
HDV | [OFF] | 1080/60i | 480/60i | 1080/60i | 480/60i | 1080/60i | 480/60i | |
1080/60i | [ON] | 480/60i | 480/60i | |||||
|
| |||||||
|
|
|
|
|
|
|
| |
HDV | [OFF] | 1080/60i8 | 480/60i | 1080/60i8 | 480/60i | 1080/30p | 480/60i | |
1080/30p | [ON] | 480/60i8 | 480/60i8 | |||||
|
| |||||||
HDV | [OFF] | 1080/60i9,10 | 480/60i | 1080/60i9 | 480/60i | 1080/30p | 480/60i | |
1080/24p | [ON] | 480/60i9 | 480/60i9 | |||||
|
| |||||||
DV | [OFF]/[ON] | 480/60i | 480/60i | 480/60i | ||||
480/60i | ||||||||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| |
1
only.
2[SIGNAL SETUP] 
[SDI SPEC.] set to [SD LOCKED].
3 [SIGNAL SETUP] 
[COMP.OUT] set to [480i].
4 [SIGNAL SETUP] 
[HD
5 16:9 picture is horizontally squeezed to a 4:3 aspect ratio.
6 
[SDI OUTPUT] is set to [ON(OSD)].
7 
] 
[TV SCREEN] is set to [ON].
8 Converted to 60i.
9 Converted to 60i using the 2:3 pulldown method.
10 When a time code signal is output from the TIME CODE or HD/SD SDI terminal, the user bit for this signal can be set to
2:3 pulldown data (
42).
11Converted to 60i using the method selected in [CAMERA SETUP] 
[24F MODE SEL].
78
