OTHER OPERATIONS ENGLISH
Using sound effects (continued)
Enhancing the stereo sound: Dolby Pro Logic II
Except 
Dolby Pro Logic II is an advanced decoder that derives
Movie : Movie software, recorded in Dolby
Surround.
Music : Stereo sources
Off : Cancel
•This works only in DVD/CD mode.
•“ŸPLII” lights when there is an effect.
•This does not work when audio is output from HDMI AV OUT terminal.
Adjusting the volume of each speaker: Speaker level adjustments
This is one of the ways to get appropriate surround effects.
Preparation
1 While stopped and no
To output a test signal.
L: | Front left | C: Center |
R: | Front right | RS: Right surround |
LS: | Left surround |
|
• There is no output from SW (subwoofer) channel.
2 To set the volume level normally used for listening.
3 To adjust the speaker level for each speaker.
OR
•Adjust the speaker levels to the same level as the front speakers.
C, RS, LS: −6 dB to +6 dB
To stop the test signal
Press [TEST] again.
To adjust speaker level during play
[Effective when playing
1.Press and hold [−CH SELECT] to select the speaker.
L → C → R → RS → LS → SW
SW: Subwoofer
•You can adjust SW only if the disc includes a subwoofer channel.
•“SW” does not appear on the display and is not adjustable when “ŸPLII” is lit.
•“S” appears on the display when “MOVIE”, “MUSIC” is selected with Super Surround (\ page 29).
In this case, you can adjust both surround speaker levels at the same time using [5, ∞].
S: −6 dB to +6 dB
2.Press [5] (increase) or [∞] (decrease) to adjust the speaker level for each speaker.
C, RS, LS, SW: −6 dB to +6 dB
(L, R: Only the balance is adjustable.)
•To adjust the balance of the front speakers, while “L” or “R” is selected, press [2, 3].
RQTX0066
30
RQT8043
