Operating the television

You can use the remote control to operate a Panasonic television.

Aim the remote control at the television.

To switch the television on or off

To switch the television’s video input mode

Adjust the volume

To play audio from your television through your home theater system

Preparation

Connect your equipment referring to “Connect to the various television terminals” (\ page 9).

Press [EXT-IN] to select “AUX” as the source. Then reduce the volume on the television to its minimum, and control the volume on this main unit.

Note

The remote control may not work properly with some models.

You can enjoy 5.1-channel surround sound when you turn on Super Surround (MOVIE, MUSIC) (\ page 29).

Changing the main unit and remote control

The remote control and main unit are factory-set to “REMOTE 1” mode.

If your remote control affects other equipment during operation, you can switch to operate in “REMOTE 2” mode.

To switch to “REMOTE 2” mode

1 While pressing and holding [

] on the main unit

“REMOTE 2” appears on the main unit display.

2 To operate in “REMOTE 2” mode

+

(Press and hold for 2 seconds)

To return to “REMOTE 1” mode

Perform steps 1 and 2 but use [1] instead of [2] for both steps. (“REMOTE 1” appears on the main unit during step 1.)

The remote control cannot work with the main unit if their modes are different.

“REMOTE 1” or “REMOTE 2” appears on the main unit display when you operate the remote control.

If “REMOTE 1” appears (The main unit is in “REMOTE 1” mode.)

Press and hold [ENTER] and [1] on the remote control for at least 2 seconds.

If “REMOTE 2” appears (The main unit is in “REMOTE 2” mode.)

Press and hold [ENTER] and [2] on the remote control for at least 2 seconds.

Note

You can still operate a television using the remote control (\ see above) even after switching the mode.

OTHER OPERATIONS ENGLISH

RQTX0066

33

RQT8043

Page 33
Image 33
Panasonic SC-PT450 manual Operating the television, Press and hold for 2 seconds, While pressing and holding