Sony NSX-A767 manual EEm!l, Preset””Nu”Mber Tuning’ “’”, P..?--- I R ..-- -Il, Repeat steps 1 and

Models: NSX-A767

1 92
Download 92 pages 35.91 Kb
Page 15
Image 15
When an FM stereo broadcast contains noise

When an FM stereo broadcast contains noise

Press MONO TUNER while pressing SHIFT on the remote control so that “MONO appears on the display.

Noise is reduced, “althoughreception is monaural

To restore stereo reception, repeat the above so that “MONO” disappears.

To change the AM tuning interval

The default setting of the AM tuning interval is 10 kHz/step. If you use this unit in an area where the frequency allocation system is 9 kHz/step, change the tuning interval.

Press POWER while pressing <>.

To reset the interval, repeat this procedure.

EEm!l

When the AM tuning interval is changed, all preset stations are cleared. The preset stations have to be set again.

P..?-—– I R ..–-–Il. .

The unit can store a total of 32 preset stations. When a station is stored, a preset number is assigned to the station. Use the preset number to tune in to a preset station directly.

7 Press TUNER/BAND to select a band, and press

4+ DOWN or - UP to select a station.
2Press 11 SET to store the station.

A preset number beginning from 1 in consecutive order for each band is assigned to the station.

Preset number

3 Repeat steps 1 and 2.

The next station will not be stored if a total of 32 preset stations for all the bands have already been stored,

m

“FULL”is displayed if you attempt to store more than 32 preset stations.

...-,

PRESET””NU”MBER TUNING’ “’”

Use the remote control to select the preset number directly.

1 Press BAND while pressing SHIFT to select a band.

2 Press numbered buttons O-9 and +“1O to select a preset number.

Example:

To select preset number 20, press +10, +10 and O. To select preset number 15, press +10 and 5.

Selecting a preset number on the main urlit

Press TUNER/BAND to select a band. Then, press 4E repeatedly or turn MULTI JOG.

Each time •~ is pressed, the nexl ascending number is selected.

To clear a preset station
Select the preset inumberof the station to be cleared. Then, press
CLEAR, and press 11 SET within 4 seconds,

The preset numbers of all other stations in the band with higher numbers are also decreased by one.

ENGL/SH 15

Page 15
Image 15
Sony NSX-A767 manual EEm!l, Preset””Nu”Mber Tuning’ “’”, P..?--- I R ..-- -Il, Press TUNER/BAND to select a band, and press