Sony NSX-A767 manual Press CD, then press A OPEN/CLOSE to open the, To check the remaining time

CD EDI

AOPEN/CLOSE~

Press CD, then press A OPEN/CLOSE to open the

disc compartment. Load disc(s) with the label side up.

To nlav one or two discs, place the discs on tray 1 and 2.

To plav three discs, press DISC CHANGE to rotate the trays after placing two discs. Place the third disc on tray 3,

Close the disc compartment by pressing 4 OPEN/CLOSE.

Tray number of the
disc to be played	Total playing time

Total number of tracks

Load discs,

To ~lav all discs in the disc compartment, press 4b. Play begins with the disc on tray 1.

Number of track being played Elapsed playing time

To play one disc only, press DISC DIRECT PLAY 1-3.

The selected disc is played once.

To stop play, press ■ ,

To pause play, press II, To resume play, press again.

To search for a particular point during playback, keep ~ or > pressed and release it at the desired point.

To skip to the beginning of a track during playback, press

+or * repeatedly or turn MULTI JOG. To remove discs, press = OPEN/CLOSE.

To start play when the power is off (Direct Play Function) Press CD. The power is turned on and play of the loaded disc(s) begins.

When 4 OPEN/CLOSE is pressed, the power is also turned on and the disc compartment is opened.

To check the remaining time

During play, press CD EDIT/CHECK. The amount of time remaining until all tracks finish playing is displayed. To restore the playing time display, repeat the above.

When using the remote control, press CD EDIT/CHECK while

pressing SHIFT.

Selecting a track with the remote control

1Press DISC DIRECT PLAY 1-3 to select a disc.

2Press numbered buttons O-9 and +1Oto select a track. Example:

To select the 25th track, press +1O, +1O and 5. To select the 10th track, press +1O and O.

The selected track starts to play and continues to the end of that disc.

Replacing discs during play

While one disc is playing, the other discs can be replaced without interrupting play.

1Press DISC CHANGE.

2Remove the discs and replace with other discs.

3Press A OPEN/CLOSE to close the disc compartment.

●When loading an 8-cm (3-inch) disc, put it onto the inner circle of the tray.

●Do not place more than one compact disc on one disc tray.

●Do not tilt the unit with discs loaded. Doing so may cause malfunctions.

●Do not use irregular shape CDs (example: heart-shaped, octagonal ones). It may result in malfunctions.

18 ENGLISH