Sony NSX-A767 Using The Spice Function, Using the FILL IN function, To select sounds, Press A

Models: NSX-A767

1 92
Download 92 pages 35.91 Kb
Page 11
Image 11
Using the FILL IN function

After once synced up if the sync lock unlocks the display will read “BEATOUT,” and again the unit will try to get synced up.

At the occurrence of BEAT OUT the level of the rhythm is automatically reduced to “1”;and it increases back to the preset level when sync is achieved again,

The BEAT function can be used together with the SPICE A/B function, as well as with the FILL IN function. (For these functions see below. ) But you cannot use the AUTO SPICE function at the same time as the BEAT function.

Using the FILL IN function

The FILL IN function is used together with the BEAT function to insert a variation of the current rhythm pattern,

The AUTO SPICE/FILL IN double function switch takes on the FILL IN function when the BEAT function is switched On.

*The AUTO SPICE function is not available at the same time as the FILL IN function,

The FILL IN function is not available when making a tape copy between two tape decks using SYNC DUB.

USING THE SPICE FUNCTION

SPICE A/B function

The SPICE A/B function allows you to add percussion to the playback of the music and create your original sounds.

Your sounds created with SPICE A/B can be recorded on tape if you want to.

To select sounds

f — .—

---Cnemacntna–---”

BEAT

ON/OFF

FILLIN

During playback with the BEAT function switched on, press FILL IN at the desired moment.

The display will read “FILLIN” and, when the current cycle of the rhythm pattern is over, you’ll hear a short sound different from the rhythm pattern. This sound depends on rhythm patterns. If you want, try to change the rhythm pattern, (Selecting a rhythm pattern is discussed earlier, under the corresponding heading.)

1 Press A.

You’ll hear the current sound stored in A,

2 Within 4 seconds, turn MULTI JOG to the left or right until you find the desired sound.

As the display changes, you’ll hear the respective sound,

3 In a similar way, select a sound for B.

[m

To actually use the function

Once you are satisfied with the sound selection, let the music start playing, and hit SPICE A or B in time with the music as if to play percussion instruments.

m

You cannot use the SPICE WB function when making a tape copy between two tape decks using SYNC DUE3.

ENGLISH 1 I

Page 11
Image 11
Sony NSX-A767 manual Using The Spice Function, Using the FILL IN function, To select sounds, Press A, SPICE A/B function