Sony NSX-A767 manual Music Sensor

..... .....,,, ,”,	.. .. . .
MUSIC SENSOR

If there is a 4-second or longer blank between each track, a search for the beginning of the current or next track during playback can

be done	easily.
Press 44	or ➤>	during playback referring to the playback side
indicator	(+ or -)	on the display.
For example, when *is			pressed while - is displayed, playback
of the next track starts.

Music sensor function may not be able to detect tracks under the following conditions:

●Blanks of less than 4 seconds between tracks @Noisy blanks

●Long passages of low-end sound

●Low overall recording levels

4

1

After playback on one deck finishes, the tape in the other deck will start to play without interruption.

1 Insert tapes into deck 1 and deck 2.

2 Press TAPE/DECK 1/2 to select the deck to be played back first.

3 Press REV MODE to select =1.

4 Press ~ P to start playback.

Playback continues until 9 is pressed.

About cassette tapes

*To prevent accidental erasure, break off the plastic tabs on the cassette tape after recording with a screwdriver or other pointed tool.

Side A

@

‘E

To record on the tape again, cover the tab openings with adhesive tape, etc. (On Type II tapes, take care not to cover the Type 11tape detection slot.)

●120-minute or longer tapes are extremely thin and easily deformed or damaged. They are not recommended.

●Take up any slack in the tape with a pencil or similar tool before use. Siack tape may break or jam in the mechanism.

ENGL/SH 17