JVC CA-MXS6MD manual Playing at Random - Random Play

4)Press SET.

“MD PROGRAM” appears in the main display. The PRGM indicator also lights.

3 Select the tracks.

1)	Push the joy control rightward ( ) or leftward
	( ) to select the track number.
2)	Press SET.

Ex. When selecting track 5

3) Repeat steps 1) and 2) to program other tracks.

4 Press MD # / 8.

The tracks are played in the order you have programed.

To stop during play, press 7.

To exit from Program play mode, select another playback mode (Normal play or Random play mode) before or after play either by pressing PLAY MODE on the remote control or by using the menu on the unit (see page 61).

•Turning off the unit or ejecting the MD will automatically change the playback mode to Normal play.

To check the program contents

Before playing, you can check the program contents by pressing 4 (1) or ¢(`) on the remote control.

•4(1) : Shows the programed tracks in the reverse order.

•¢(`) : Shows them in the programed order.

To modify the program

Before playing, you can erase the last programed track by pressing CANCEL. Each time you press the button, the last programed track is erased from the program.

To add tracks in the program before you start play,

simply select track numbers you want to add.

To erase the entire program, before or after play, press and hold CANCEL on the unit until “MD PROGRAM ALL CLEAR” appears in the main display.

•When you eject the MD or turn off the unit, the entire program is also erased.

If you try to program a 33rd step

“MD PROGRAM FULL” will appear in the main display.

If your entry is ignored

You have tried to program a track that does not exist on the MD (for example, selecting track 14 on an MD that only has 12 tracks). Such entries are ignored.

If the total playing time exceed 2 hours and 30 minutes

The playing time will not be shown. (“– – : – –” will appear.)

Playing at Random — Random Play

The tracks of the loaded MD will play at random.

On the remote control:

1 Load an MD.

•If the current playing source is not the MD recorder, press MD 3/ 8, then 7before going to the next step.

2 Press PLAY MODE so that “MD RANDOM” appears in the main display.

The RANDOM indicator also lights.

•Each time you press the button, play mode changes as follows:

Program play	Random play
(MD PROGRAM)	(MD RANDOM)

Normal play

(MD NORMAL)

– 29 –