JVC CA-MXS6MD Join Function, Move Function, Press ENTER/DEMO to finish the editing procedure

Continued

JOIN Function

This function allows you to join two adjacent tracks into one track.

•To stop any time during editing process, press TITLE/ EDIT.

1 Insert an MD you want to edit into the MD loading slot.

•It takes about 5 seconds for the unit to read the TOC (Table Of Contents) of the inserted MD. While the unit is reading it, you cannot go to the next step.

2 Press TITLE/EDIT.

The source is changed to “MD.”

• If “JOIN” is not shown, you cannot join the tracks.

3 Push the joy control downward ( ) to select “JOIN” (highlighted), then press SET.

4 Push the joy control downward ( ) or upward ( ) to select the two adjacent tracks you want to join.

Ex. When you want to join tracks 2 and 3

5 Press SET.

•If you have selected wrong tracks, press CANCEL, then select the correct tracks.

6 Press ENTER/DEMO to finish the editing procedure.

“EDITING” appears for a while, then “WRITING” flashes while the editing you have made is being recorded on the MD.

To divide the joined tracks, see the DIVIDE function.

If “CANNOT JOIN” appears in step 5

You cannot join the following tracks.

•Tracks recorded using different recording length modes (LONG MODE — SP/LP2/LP4). (See page 33.)

•Digital-recording tracks and analog-recording tracks.

•Tracks recorded using monaural long recording method (not possible on this unit) and stereo-recording tracks.

MOVE Function

This function allows you to move a track to the position you prefer. It is useful to change the order of the tracks as you like.

•To stop any time during editing process, press TITLE/ EDIT.

1 Insert an MD you want to edit into the MD loading slot.

•It takes about 5 seconds for the unit to read the TOC (Table Of Contents) of the inserted MD. While the unit is reading it, you cannot go to the next step.

2 Press TITLE/EDIT.

The source is changed to “MD.”

• If “MOVE” is not shown, you cannot move the track.

– 42 –