5 Program other tracks you want.
•To program tracks from the same disc, repeat step 4.
•To program tracks from a different disc, repeat steps 3 and 4.
6 Press CD 3/ 8.
The tracks are played in the order you have programed.
On the unit:
You have to use the menu for the following operations. For general information on the menu, see pages 59 and 60.
1 Load CDs.
•If the current selected source is not the CD player, press CD #/ 8, then 7 before going to the next step.
2 Select Program play mode using the menu. (See also page 61.)
1)Press MENU.
“MENU” appears in the main display.
2)Push the joy control downward ( 
) to select “CD (current play mode setting*).”
*The current play mode — CONTINUE, RANDOM, or PROGRAM will appear following “CD” in the main display.
3)Push the joy control rightward ( 
) or leftward ( 
) to select “PROGRAM.”
4)Press SET.
“CD PROGRAM” appears in the main display. The PRGM indicator also lights.
3) Press SET.
Ex. Track No. 4 is selected from
Disc No. 1.
4)Repeat steps to program other tracks.
•To program tracks from the same disc, repeat steps 2) and 3).
•To program tracks from a different disc, repeat steps 1) to 3).
4 Press CD #/ 8.
The tracks are played in the order you have programed.
To stop during play, press 7.
• Program play also stops when you open a disc tray.
To exit from Program play mode, select another playback mode (Continuous play or Random play mode) before or after play either by pressing PLAY MODE on the remote control or by using the menu on the unit (see page 61).
•Turning off the unit will automatically change the playback mode to Continuous play.
To check the program contents
Before playing, you can check the program contents by pressing 4(1) or ¢(`) on the remote control.
•4(1) : Shows the programed tracks in the reverse order.
•¢(`) : Shows them in the programed order.
3 Select the tracks.
1)Push the joy control upward ( 
) or downward ( 
) to select the disc number.
2)Push the joy control rightward ( 
) or leftward ( 
) to select the track number.
To modify the program
Before playing, you can erase the last programed track by pressing CANCEL. Each time you press the button, the last programed track is erased from the program.
•When you eject a disc, the tracks selected from that ejected disc are erased from the program.
To add tracks in the program before you start play,
simply select track numbers you want to add.
To erase the entire program, before or after play, press and hold CANCEL on the unit until “CD PROGRAM ALL CLEAR” appears in the main display.
• Turning off the unit also erases the entire program.
