JVC CA-MXS6MD manual Creating Your Own Sound Mode, MANUAL Mode

To check the sound mode currently selected, press	3 Push the joy control rightward ( ) or leftward ( )
SOUND once while the SOUND indicator is lit. The
currently selected sound mode screen will appear in the	to select “SET UP.”
main display.

• Each time you push the joy control, the sound modes

change as follows:

Ex. When “HALL” is currently selected (with “Elephant”

D.CLUB

HALL

STADIUM

ROCK

selected as the animation character)

FLAT (Canceled)

POP

When using the unit, you can select the sound

MANUAL

CLASSIC

SET UP

modes by using the menu (see page 60).

4 Press SET.

The equalizer pattern adjustment screen appears.

Creating Your Own Sound Mode —

MANUAL Mode

You can create and store your own sound mode.

• You have to use the menu for the following operations.

5 Adjust the equalizer pattern.

For general information on the menu, see pages 59 and

60.

1) Push the joy control rightward (

) or leftward

• There is a time limit in doing the following steps. If the

(

) to select the frequency range to adjust

setting is canceled before you finish, start from step 1

(LOW, MID, HIGH).

again.

On the unit ONLY:

2) Push the joy control upward ( ) or downward

(

) to adjust the level (–3 to +3) of the selected

1 Press MENU.

frequency range.

	Ex. When the source is CD, and playing			3) Repeat steps 1) and 2) to adjust the level of the
2 Push the joy control downward ( ) to select				other frequency ranges.
			6 Press SET again (or wait until the above indication
	“SOUND” (highlighted).
				disappears).
				The equalizer pattern you have created is stored in
				memory (MANUAL).
			To use your own sound mode
			Select “MANUAL” when using the sound modes. See
		Current sound mode	“Selecting the Sound Modes” on page 15.

– 16 –