Changing the Main Display Screen
You can change the screen pattern which appears in the main display while the unit is not playing or no operation is done for a certain period of time.
On the unit ONLY:
You can do the following procedure while the unit is turned on.
•If the unit is turned off, you can only select “DEMO” in step 2.
1 Press ENTER/DEMO.
The SCREEN MODE screen appears.
•If “DEMO OFF!” appears, press ENTER/DEMO again.
2 Push the joy control upward ( ) or downward ( ) to select the screen pattern you want in the main display.
DEMO: Starts the display demonstration =go to step 4.
PENGUIN: Penguins try to catch fishes.
DOLPHIN: Dolphins and whales swim.
MONKEY: A monkey eats bananas.
SURFING: A surfer enjoys surfing.
FIREWORKS: Sets up multicolored fireworks.
STAR DUST: Colorful star dust shines in the sky.
STOVE: Fire frame in the stove and rocking chair create a relaxing atmosphere.
OFF: To cancel the display demonstration and the animation screen =go to step 4.
3 When selecting any setting other than “DEMO” and “OFF” in the above step:
Push the joy control repeatedly rightward ( ) or leftward ( ) to select the
•You can select the
4 Press SET to finish the setting.
How these settings work
•When selecting “DEMO”: Display demonstration starts.
If you do not cancel the display demonstration by pressing ENTER/DEMO, display demonstration automatically starts in the following cases:
–2 minutes after the unit is turned off.
–When no operation is done for more than 2 minutes.
•When selecting any setting other than “DEMO” and “OFF”:
Selected image appears in the lower portion of the main display.
If you press any button while the selected image is shown in the main display, it goes off from the main display. However, it will be shown again if no operation is done for your specified
•When selecting “OFF”:
“SCREEN OFF!” appears in the main display. Neither display demonstration nor selected image appears, but one of the selected animation characters or of the level meters (see page 14) appears in the lower portion of the main display.
While recording or editing an MD
Display demonstration and animation screen will not appear.
When the AC power is unplugged
“DEMO” is automatically restored unless you have stored another image setting in backup memory. See “To store the display setting in memory” on page 15.