JVC CA-MXS6MD manual Input a character, Ex. When entering H

7 Input a character.

• Ex. When entering “H”

1) Push the joy control horizontally ( / ) and vertically ( / ) until “H” is selected.

Character entry position

2)Press SET.

The selected character is entered, and the character entry position moves to the next.

Character entry position

Blanks

• To change the character set, select this, and press SET.

• To move the character entry position while entering a title, select 3for moving it rightward and 2 for moving it leftward, then press SET.

Each time you press SET, the character entry position moves.

•To enter a blank, select a blank in the main display, then press SET.

•If you have entered an incorrect character, press CANCEL to cancel the last entry.

8 Repeat steps 6 and 7 to enter other characters.

•The main display can only show 7 characters at a time. If you enter the 8th character, the first character disappears, and so on.

9 Press ENTER/DEMO to finish the current title entry.

The unit enters title entry mode again.

•You can assign another title by repeating steps 4 to 9.

10 Press TITLE/EDIT (or ENTER/DEMO again) to exit from the title entry mode.

11 Press 0for the MD recorder to eject the MD.

“WRITING” flashes while the editing you have made is being recorded on the MD.

You can assign titles during play or recording

•During play: Entering a track title

The MD recorder repeats playback of the current track until you press ENTER/DEMO in step 9 above. When you press ENTER/ DEMO, the next track will be played.

Entering a disc title

The MD recorder repeats playback of all tracks of the MD until you press ENTER/DEMO in step 9 above. When you press ENTER/DEMO, the MD recorder enters the track title entry mode.

•During recording: Entering a track title

The MD recorder continues recording even after you press ENTER/DEMO in step 9 above. When you press ENTER/ DEMO, a track title is assigned to the track where you have started the title entry. If you do not press ENTER/DEMO before recording ends, the track title assigned will be canceled.

•During CD Synchronized Recording (see page 35):

You can assign the disc title, and 16 track titles one after another as recording goes on. The track titles you have entered are automatically assigned to the tracks recorded on the MD in sequential order. If you enter 17th track title or more, they are ignored.

If “NO OPERATE!” appears

Operation you have tried to use is not acceptable. For example, you have tried to use the remote control while entering a title using the buttons on the unit. Use the buttons on the unit only.

– 47 –