Chapter 9 Service/Subscriber Provisioning
Defining Policies For Service Provisioning
Note You can apply an existing profile to a new profile to save time when configuring new profiles. Select the Apply Profile option from the Edit menu and then select the existing profile you wish to apply from the profiles listed. The configuration settings are copied from the existing profile to the new profile. The settings copied appear in blue.
Note Select the Copy and Copy Page Configuration options in the Edit menu to cut and paste between different profiles. This is useful when you wish to copy profile information from one to the next.
Step 5 Select the Local Service Profile tab (when applicable).
Note The Configure option (in the Local Service Profile panel on the Configuration tab) must be set to Yes to allow you to configure the parameters displayed in the Local Service Profile tab.
Figure 9-37 IP Uplink Service Profile Configuration Window (Local Service Profile Tab)
See the “Local Service Profile Tab” section on page
Cisco 6400 Service Connection Manager User Guide
|
| ||
|
|
