Cisco Systems OL-0569-01 manual Applying a PPPoA-SD Service Profile

Chapter 9 Service/Subscriber Provisioning

Service Provisioning

Configuration window. The PPPoA-SD Services list is empty when no PPPoA-SD instances have been created. See the “Creating a Service Instance” section on page 9-36for details on how to create a service instance.

Note Proceed to the “Configuring the PPPoA-SD Service Parameters” section on page 9-44if you are not applying a service profile.

Applying a PPPoA-SD Service Profile

Step 3 Select Apply Profile from the Edit menu.

Step 4 Select the appropriate profile from the list of profiles displayed. The profile parameters are copied to the appropriate service instance parameters in the PPPoA-SD Service Configuration window and appear in blue.

Configuring the PPPoA-SD Service Parameters

See the “PPPoA-SD Service Configuration Window” section on page 10-26for further details on the parameters displayed.

Step 5 Configure the parameters displayed in the Virtual Template Parameters, IP Address Pool, and VC Parameters panels, as required.

Step 6 Select the Service Details tab.

Figure 9-57 PPPoA-SD Service Configuration Window (Service Details Tab)

See the “PPPoA-SD Service Configuration Window” section on page 10-26for further details on the parameters displayed.

Cisco 6400 Service Connection Manager User Guide

9-44 OL-0569-01