Cisco Systems OL-0569-01 manual Disconnecting a Subscriber from a Service Instance, Details panel

Chapter 9 Service/Subscriber Provisioning

Subscriber Provisioning

Disconnecting a Subscriber from a Service Instance

To disconnect a subscriber from a service instance, follow these steps:

Step 1 Select the Cisco 6400 UAC, Subscriber, Disconnect s option from an NSP card. The Service/Subscriber Disconnection window appears.

Figure 9-95 Service/Subscriber Disconnection Window (Disconnect)

41536

See the “Service/Subscriber Disconnection Window” section on page 10-64for further details on the parameters contained in the Service/Subscriber Disconnection window.

Step 2 Select the Cisco 6400 chassis and ATM Port from the lists displayed on the left side of the window.

Step 3 Select a Subscriber and Current Connections from the from the lists displayed in the Connection

Details panel.

Step 4 Click Disconnect. A pop up window appears to inform you that the selected subscriber is about to be disconnected.

Figure 9-96 About to Disconnect Subscriber

41534

Cisco 6400 Service Connection Manager User Guide

9-78 OL-0569-01