Cisco Systems OL-0569-01 manual Configuring and Commissioning a Pure ATM Service Instance

Chapter 9 Service/Subscriber Provisioning

Service Provisioning

Configuring and Commissioning a Pure ATM Service Instance

To configure and commission a Pure ATM switching service instance, follow these steps:

Step 1 Select the Cisco 6400 UAC, Service, Configure ATM Service option from the egress ATM line card object in MapViewer.

Note You cannot apply a profile to the pure ATM switching service.

The ATM Service Configuration window appears (see Figure 9-53). See the “ATM Service Configuration Window” section on page 10-24for further details on the parameters displayed.

Figure 9-53 ATM Service Configuration Window (Service Details Tab)

Select a chassis

Select an ATM service instance

(only ATM service instances are displayed here)

35298

Step 2 Select the appropriate Cisco 6400 chassis and ATM Service instance from the lists displayed at the left side of the window.

Only the ATM service instance objects (for the selected chassis) are displayed in the ATM Services list. Service instances for other service types are listed in their appropriate Service Configuration windows. For example, L2TP service instance objects are displayed in the L2TP Configuration window. The ATM Services list is empty when no ATM Service instances have been created. See the “Creating a Service Instance” section on page 9-36for details on how to create a service instance.

Configuring the ATM Service Parameters

Step 3	Enter a Service Description (when required).
Step 4	Select a connection from the ATM Connection list.
Step 5	Enter Subscriber VPI, Subscriber VCI and Subscriber Name in the Subscriber Connections panel, as
	required.
Step 6	Select the Service Uplink tab.
	Cisco 6400 Service Connection Manager User Guide
OL-0569-01		9-41