Cisco Systems OL-0569-01 manual Service/Subscriber Provisioning Service Provisioning

Chapter 9 Service/Subscriber Provisioning

Service Provisioning

Configuring and Commissioning an RFC1483 Routing Service Instance

To configure and commission an RFC1483 routing service instance, follow these steps:

Step 1 Select the Cisco 6400 UAC, Service, Configure RFC1483 Routing Services option from a Site, Shelf, Chassis, or service instance object. The RFC1483 Routing Service Configuration window appears (see Figure 9-80).

Figure 9-80 RFC1483 Routing Service Configuration Window (Configuration Tab)

See the “RFC1483 IRB Service Profile Configuration Window” section on page 10-11for further details on the parameters displayed.

Step 2 Select the appropriate Cisco 6400 and RFC1483 Routing Service instance from the lists displayed on the left side of the window.

Note RFC1483 Routing service profiles cannot be created for the RFC1483 Routing service and therefore cannot be applied.

Step 3 Configure the parameters displayed on the Configuration tab, as required.

Cisco 6400 Service Connection Manager User Guide

OL-0569-01 9-63