Cisco Systems OL-0569-01 Select the Connect to Multi-Domain tab, Connect Subscriber to NRP Window

Chapter 9 Service/Subscriber Provisioning

Subscriber Provisioning

Step 8 Configure the parameters displayed in the Connect to Single Domain tab, as required.

Step 9 Select the Connect to Multi-Domain tab.

Figure 9-93 Service/Subscriber Connection Window (Connect to Multi-Domain Tab)

Step 10 Select an NRP from the Node Route Processor list.

Step 11 Configure the parameters displayed in the Connect to Multi-Domain tab, as required.

Step 12 Click Connect. A pop up window appears (see Figure 9-94)asking you to confirm that you wish to connect the selected subscriber.

Figure 9-94 Connect Subscriber to NRP Window

Step 13 Click Yes to proceed. An Action report window appears displaying the Cisco IOS transaction log as connection occurs.

Cisco 6400 Service Connection Manager User Guide

9-76 OL-0569-01