Cisco Systems OL-0569-01 manual Prompt Window

Chapter 9 Service/Subscriber Provisioning

Defining Policies For Service Provisioning

Step 2 Select Create Profile. A Prompt window appears (see Figure 9-35).

Figure 9-35 Prompt Window

Step 3 Enter a name for the profile in the Enter profile name data entry box. IP Uplink Bronze was entered in the example shown in Figure 9-35.

Note Each service profile must have a unique name. Do not insert spaces into a service profile name.

The new profile name appears in the IP Uplink Service Profiles list on the left side of the window (see Figure 9-36).

Figure 9-36 IP Uplink Service Profile Configuration Window (Configuration Tab)

Step 4 Configure the parameters displayed in the Configuration tab (shown in Figure 9-34),as required. The Configure option (in the Local Service Profile panel on the Configuration tab) must be set to Yes to allow you to configure the parameters displayed in the Local Service Profile tab.

Cisco 6400 Service Connection Manager User Guide

9-26 OL-0569-01