Chapter 9 Service/Subscriber Provisioning
Service Provisioning
Step 7 Enter a Service Description, if required.
Step 8 Select a connection from the Current Connection list and configure the values in the Subscriber Connections panel, as required.
Commissioning the PPPoA-SD Service
Step 9 Click Commission Service to roll the service onto the selected Cisco 6400 UAC. A pop up window appears for you to confirm that you wish to commission the selected service.
Figure 9-58 About to Change Service State Confirmation Window
Step 10 Select Yes to commission the service (or No to return to the Service Instance Configuration window). The Action Report window appears.
Figure 9-59 Action Report Window
The Action Report window details the Cisco IOS commands executed when the service is commissioned. Invalid Cisco IOS commands result in a failure to commission the service.
Step 11 Check the details in the Action Report window to ensure that the service was commissioned successfully.
Cisco 6400 Service Connection Manager User Guide
|
| ||
|
|
