Cisco Systems OL-0569-01 manual Deleting an Existing RFC1483 Bridging Service Profile

Chapter 9 Service/Subscriber Provisioning

Defining Policies For Service Provisioning

Deleting an Existing RFC1483 Bridging Service Profile

To delete an existing RFC1483 Bridging service profile, follow these steps:

Step 1 Select the Cisco 6400 UAC, Profiles, Configure RFC1483 Bridging Service Profiles option from a Site, Shelf, Chassis, or service instance object in the MapViewer window.

The RFC1483 Bridging Service Profile Configuration window appears. Existing service profiles are displayed in the BB Service Profiles list on the left side of the window.

Figure 9-24 RFC1483 Bridging Service Profile Configuration Window (Configuration Tab)

Step 2 Select the existing service profile (displayed in the RFC1483 Bridging Service Profiles list) that you wish to delete.

Step 3 Select the Delete Profile option from the Edit menu. Select the profile you wish to delete from the list displayed.

A Deletion Prompt window appears (see Figure 9-25)for you to confirm that you wish to delete the selected profile.

Figure 9-25 Deletion Prompt Window

Step 4 Click Yes to delete the selected profile or click No to close the window without deleting the profile.

When a profile is deleted it disappears from the list of RFC1483 Bridging Service Profiles in the RFC1483 Bridging Service Profile Configuration window.

Cisco 6400 Service Connection Manager User Guide

OL-0569-01 9-19