Cisco Systems OL-0569-01 manual Service/Subscriber Provisioning Service Provisioning

Chapter 9 Service/Subscriber Provisioning

Service Provisioning

Configuring and Commissioning an RFC1483 Bridging Service Instance

To configure and commission an RFC1483 Bridging service instance, follow these steps:

Step 1 Select the Cisco 6400 UAC, Service, Configure RFC1483 Bridging Service option from a Site, Shelf, Chassis, or service instance object. The RFC1483 Bridging Service Configuration window appears:

Figure 9-65 RFC1483 Bridging Service Configuration Window (Configuration Tab)

See the “Configuration Tab” section on page 10-34for further details on the parameters displayed.

Step 2 Select the appropriate Cisco 6400 and RFC1483 Bridging Service from the lists displayed on the left side of the window.

Only the RFC1483 Bridging service instance objects (for the selected chassis) are displayed in the RFC1483 Bridging Services list. Service instances for other service types are listed in their appropriate Service Configuration windows. For example, L2TP service instance objects are displayed in the L2TP Configuration window. The RFC1483 Bridging Services list is empty when no RFC1483 Bridging Service instances have been created. See the “Creating a Service Instance” section on page 9-36for details on how to create a service instance.

Note Proceed to the “Configuring the RFC1483 Bridging Service Parameters” section on page 9-52when you are not applying a service profile.

Cisco 6400 Service Connection Manager User Guide

OL-0569-01 9-51