Chapter 9 Service/Subscriber Provisioning
Service Provisioning
Figure 9-54 ATM Service Configuration Window (Service Uplink Tab)
Step 7 Enter details into the parameters displayed in the Service Uplink PVC panel, as required. See the “Service Uplink Tab” section on page
Commissioning the Pure ATM Service Instance
Note This is the first stage at which you actually “roll” the selected service configuration onto the Cisco 6400 UAC hardware.
Step 8 Click Commission Service to save the configuration information you have entered and roll the service onto the Cisco 6400 UAC. A pop up window appears for you to confirm that you wish to commission the selected service.
Figure 9-55 About to Change Service State Confirmation Window
Step 9 Select Yes to commission the service (or No to return to the ATM Service Instance Configuration window without commissioning the ATM service). An Action Report window appears. The Action Report window details the Cisco IOS commands executed when the service is commissioned. Invalid Cisco IOS commands result in a failure to commission the service.
Cisco 6400 Service Connection Manager User Guide
| ||
|
