Magnum 6KM Mobile Ethernet Switch Installation and User Guide

07/10

6.0TROUBLESHOOTING

All Magnum Ethernet products are designed to provide reliability and consistently high performance in all network environments. The installation of a Magnum 6KM Switch is a straight forward procedure. The operation is also straightforward and is discussed in Section 4.0 of this 6KM User Guide.

Should problems develop during installation or operation, this section is intended to help locate, identify and correct these types of problems. Please follow the suggestions listed below prior to contacting your supplier. However, if you are unsure of the procedures described in this section or if the Magnum 6KM Switch is not performing as expected, do not attempt to repair the unit; instead contact your supplier for assistance or contact GarrettCom Customer Support.

6.1Before Calling for Assistance

1.If difficulty is encountered when installing or operating the unit, refer back to the Installation Section of the applicable chapter of this manual. Also check to make sure that the various components of the network are interoperable.

2.Check the cables and connectors to ensure that they have been properly connected and the cables/wires have not been crimped or in some way impaired during installation. (About 90% of network downtime can be attributed to wiring and connector problems.)

3.Make sure that power is properly attached to each Magnum 6KM Switch unit. Use the PWR LEDs to verify each unit is receiving power.

4.If the problem is isolated to a network device other than the Magnum 6KM Switch product, it is recommended that the problem device be replaced with a known good device. Verify whether or not the problem is corrected. If not, go to Step 5 below. If the problem is corrected, the Magnum 6KM Switch and its associated cables are functioning properly.

5.If the problem continues after completing Step 4 above, contact your supplier of the Magnum 6KM Switch unit or if unknown, contact GarrettCom, Inc. by fax, phone or email (support@garrettcom.com) for assistance.

6.2When Calling for Assistance

Please be prepared to provide the following information.

1.A complete description of the problem, including the following points:

a.The nature and duration of the problem;

b.Situations when the problem occurs;

c.The components involved in the problem;

d.Any particular application that, when used, appears to create the problem;

www . GarrettCom . com

32

Page 37
Image 37
GarrettCom MAGNUM 6KM manual Troubleshooting, Before Calling for Assistance, When Calling for Assistance