Magnum 6KM Mobile Ethernet Switch Installation and User Guide | 07/10 |
NOTE: for Power Substations: In support of the IEEE 1613 Class 2 standard, GCI advises that, for substation applications, the M12 ports are intended for connectivity to other communication equipment such as routers or telecommunication multiplexers installed in close proximity (i.e., less than 2 meters or 6.5ft) to the 6KM. It is not recommended to use these ports in substation applications to interface to field devices across distances which could produce high (greater than 2500V ) levels of ground potential rise (GPR) during
Fig 3.2.1a 10/100Mb
3.2.2Connecting Twisted Pair for Gigabit (CAT5e or better, UTP or STP)
The M12 Gigabit ports of the Magnum 6KM can be connected to the media types,
The following procedure describes how to connect a
1.
(unshielded or shielded cables and wiring may be used)
2.Connect the other end of the cable to the corresponding device
3.Use the LINK LED to ensure proper connectivity by noting that the LED will be illuminated when the unit is powered and proper connection is established.
www . GarrettCom . com
14
