Grizzly G5962 Main Specifications Operation Info, Headstock Info, Tailstock Info, Threading Info

Main Specifications:
Operation Info
Swing Over Bed	18-1/4 in.
Dist Between Centers	60 in.
Swing Over Cross Slide	11-5/16 in.
Swing Over Saddle	11-1/4 in.
Swing Over Gap	24-3/4 in.
Max Tool Bit Size	1 in.
Compound Travel	4-7/8 in.
Carriage Travel	55 in.
Cross Slide Travel	8-5/8 in.
Headstock Info
Spindle Bore	3-1/16 in.
Spindle Taper	MT#8
No Of Spindle Speeds	12
Range Of Spindle Speeds	24, 32, 55, 70, 95, 160, 240, 320, 550, 700, 950, 1600 RPM
Spindle Type	D1-8 Cam Lock
Spindle Bearings	Tapered Roller
Tailstock Info
Tailstock Travel	4-3/4 in.
Tailstock Taper	MT#4
Tailstock Barrel Diameter	2-3/16 in.
Threading Info
No Of Inch Threads	40
Range Of Inch Threads	2 - 56 TPI
Range Of Longitudinal Feeds	0.0013 - 0.0352 in.
No Of Longitudinal Feeds	40
No Of Cross Feeds	40
Range Of Cross Feeds	0.0006 - 0.0184 in./rev.
No Of Metric Threads	52
Range Of Metric Threads	0.4 - 14 mm
No Of Modular Threads	44
Range Of Modular Threads	0.4 - 7 MP
No Of Diametrical Threads	32
Range Of Diametrical Threads	4 - 56 DP
Dimensions
Bed Width	11-3/4 in.
Leadscrew TPI	4
Leadscrew Length	76 in.
Steady Rest Capacity	6 in.
Follow Rest Capacity	4 in.
Faceplate Size	16-1/2 in.
Leadscrew Diameter	1.245 in.
Feed Rod Diameter	0.870 in.
Floor To Center Height	45-3/4 in.
Height With Leveling Jacks	51 in.
Construction
Base Construction	Cast Iron
Headstock Construction	Cast Iron
Headstock Gears Construction	Flame Hardened Steel
Bed Construction	Induction Hardened Cast Iron
Body Construction	Cast Iron
Stand Construction	Cast Iron
Paint	Epoxy

Model G5962	The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications.	PAGE 2 OF 3
	Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.