DO NOT remove ground prong from plug to fit into a
Check with a qualified electrician or one of our service personnel if the grounding instructions are not completely understood, or if you are in doubt as to whether the tool is properly grounded.
Extension Cords
If you find it necessary to use an extension cord with this machine:
•Only use a cord that is rated for standard ser- vice (Grade S).
•Only use a cord that contains a grounding prong.
•Use at least a 16 gauge cord if the cord is 50 feet long or less.
•Use at least a 14 gauge cord if the cord is between
•Always repair or replace cords when they become worn or damaged.
We have covered some basic electrical requirements for the safe operation of your bandsaw. These requirements are not nec- essarily comprehensive. You must be sure that your particular electrical configuration complies with local and state codes. Ensure compliance by checking with your local municipality or a licensed electrician.
G8692 Portable Bandsaw and Stand |
