Grizzly G8988 specifications

MODEL G8988SAFETY PADDLE SWITCH

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com

WARNING: NO PORTION OF THIS INSTRUCTION SHEET MAY bE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROvAL OF GRIzz LY INDUSTRIAL, INC.

#ts13929 printed in ChinA

Figure 1. g8988 safety paddle switch.

the Model g8988 features a large on/oFF pad-

dle with a removable safety key that can be used

to disable the switch. this switch is designed to fit

a 7⁄8" x 1

5⁄8" rectangular hole.

rated Voltage .....................................125V/250V

rated Current at 125V ...................................16A

rated Current at 250V ...................................10A

To reduce risk of serious burns, electrocu-

tion or death when installing this switch:

• Only use this switch to replace an existing

machine switch that has the same physi-

cal configuration and equivalent electrical

specifications/ratings.

• Installationmustonlybeperformedbyan

electrician or qualified service personnel,

and all applicable electrical codes must

be adhered to.

• Turn off and completely disconnect all

power sources to the machine before

installing the switch.

• Do not use this switch in wet or damp

locations, or near explosive fumes or

flammable liquids. It is not sealed or rated

for these environments.

• Make sure there is a verified machine

ground on the circuit this switch is

installed.