OPERATING TIPS AND MAINTENANCE
Operating Guides and Tips
Avoid overloading the jig saw. Do not apply excessive pressure to the tool while using. If the speed drops abnormally, decrease pressure immediately.
Ensure a safe workplace. Clear the work area of all parts and debris that may cause injury by flying objects. Securely fix the workpiece in a vise or otherwise clamp to avoid injury. Do not attempt to hold the workpiece by hand.
Inspect the tool before use. Run the tool free of the workpiece before using to ensure all parts are running smooth and there are no abnormal sounds or sparks. If any defect is found, have the unit serviced.
Know your work site. Take care to make sure the workpiece is not supporting another structure or that there are no obstructions. Before cutting into walls, check for wires, other electri- cal hazards, or plumbing which may be hidden in the wall space.
Operating this equipment has the potential to propel debris into the air which can cause eye injury. Always wear safety glasses or goggles when operating equipment. Be certain the safety glasses you wear meet the appropriate standards of the American National Standards Institute (ANSI).
Maintenance
Your 110 V jig saw will give you hundreds of hours of operation time before ever needing service. The electrical compo- nents of this saw are not user serviceable. This product is double insulated which pro- vides protection from electrical shock should a problem ever develop with grounding. Great care must be taken whenever servicing double insulated equipment to make certain the repair does not destroy the insulated properties. Service should be performed only by a qualified electrical technician.
Keep the saw free from dirt and grease. Always store it in a dry place.
Disassembly and improper reassembly of this device can result in electrical shock danger. Always have this device serviced by a qualified electrical repair technician. Serious injury will result.
G8994Z Variable Speed Jig Saw |
