![](/images/new-backgrounds/1151197/15119755x1.webp)
2.Transmission Box — Lubricate after every 12 hours of continuous use. See Figure 21 for location.
Figure 21. Transmission box grease fitting.
3.Table Lifting Gears — Once a week for heavy use; once a month for moderate use. See Figure 22 for locations.
Figure 22. Table lifting gear grease fittings.
4.Chain — Clean and regrease as determined by visible inspection for dust or grime in the chain grease.
Always wipe off excess grease from all loca- tions after lubricating!
V-Belt
Avoid getting grease or oil on the
To loosen/tighten belt tension:
1.Thread in the motor mount adjustment bolts (Figure 23) to loosen the
Figure 23. Motor mount adjustment bolts.
Extreme Duty Planers |