Grizzly G9860 owner manual Inventory Clean Up, Inventory Figure Qty

Inventory Clean Up

The following is a description of the main compo- nents shipped with your machine. Lay the compo- nents out to inventory them.

Note: If you can't find an item on this list, check the mounting location on the machine or examine the packaging materials carefully. Occasionally we pre-install certain components for shipping purposes.

Inventory: (Figure 9)		Qty
A.	Fence Assembly	1
B.	Cutterhead Guard	1
C.	Push Blocks	2
D.	Fence Support (G9860/G9860ZX)	1

E.Fence Lock Assembly (G9860/G9860ZX).. 1

F. Fence Tilt Handle 1

The unpainted surfaces are coated with a waxy oil to prevent corrosion during shipment. Remove this protective coating with a solvent cleaner or degreaser, such as shown in Figure 10. For thorough cleaning, some parts must be removed.

For optimum performance, clean all moving parts or sliding contact surfaces. Avoid chlo- rine-based solvents, such as acetone or brake parts cleaner that may damage painted surfac- es. Always follow the manufacturer’s instructions when using any type of cleaning product.

Gasoline and petroleum products have low flash points and can explode or cause fire if used to clean machinery. DO NOT use these products to clean the machinery.

B

A

C

F

D

E

Many cleaning solvents are toxic if inhaled. Minimize your risk by only using these products in a well ventilated area.

	Figure 9. Inventory.
Hardware & Tools: (not shown)		Qty
•	Combo Wrench 10mm	1
•	Open-End Wrench 11/13mm	1
•	Hex Wrenches 3, 4, 5, 6, 8mm
	1 Each
•	Knife Cutterhead Models:
	—Knife Setting Gauge	1
•	Spiral Cutterhead Models:
	—Pneumatic Torque Wrench Assembly	1
	—T-Handle Driver	1
	—Torx Bits T-20	15
	—Indexable Inserts 14 x 14 x 2mm	10
	—Flat Head Torx Screws T-20 M6-1 x 15..30

-14-

G2544—Solvent Cleaner & Degreaser H9692—Orange Power Degreaser

Great products for removing shipping grease.

Figure 10. Cleaner/degreasers available from

Grizzly.

Extreme Series Jointer (Mfg. Since 9/11)