OPERATIONS, CONT’D
Changing Blades
MAKE SURE SAW IS UNPLUGGED!
1.Rotate the blade guard clockwise to reveal the blade.
2.While holding the blade guard open, place the saw onto a secure surface engaging the blade teeth onto the surface.
3.While maintaining downward pres- sure on the saw, remove the retaining screw and washer from the center of the blade.
4.Note the orientation of the teeth. They are pointed toward the leading edge base of the saw. Be careful to avoid touching the saw teeth and slip the blade out of the saw.
5.Ensuring the teeth on the new blade are in the correct orientation, slide the blade into the slot on the bottom edge of the closed blade guard.
6.Carefully center the blade over the arbor and replace the washer and retaining screw.
7.Tighten the retaining screw in the same manner as it was removed.
Saw blades are sharp. Use care when handling. Blades may cut or nick fin- gers or hands causing lacerations, disfigurement or disability.
G9906 71⁄4" Circular Saw |
