Grizzly G9956 Speeds and Timer, Decrease, Increase, Light indicates time set for 6 hours of

Speeds and Timer

You can adjust the fan speed and the length of time your double air filter runs by programing it with the included remote controller. To toggle between fan speed and timer control functions, press the ON/HR button.

To set the fan speed:

1.Press the ON/HR button once. The fan should start to run.

—If one or more of the lower lights comes on, press the ON/HR again.

2.Increase the fan speed by pressing the increase button designated by the right hand pointer.

3.Decrease the fan speed by pressing the decrease button designated by the left hand pointer.

To set the fan timer:

1.Press the ON/HR button after setting the fan speed.

—If some or all of the lights in the upper row come on, press the ON/HR button again.

2.Increase the amount of time the fan runs before automatically shutting off by pressing the increase button.

—Each time this button is pressed, the amount of time increases by two hours,w up to a maximum 8 hour cycle.

3.Decrease the amount of time the fan runs before automatically shutting off by pressing the decrease button.

NOTE—When the automatic shut off feature is not going to be used, press the decrease button until the light over “continue” is illuminated.

					SPEED
SPEED					HOUR
					CONTINUE 2	4	6	8
HOUR					Decrease			Increase
CONTINUE	2	4	6	8
Decrease					Increase
					ON/HR		OFF
ON/HR			OFF		Figure 8. Light indicates time set for 6 hours of
					operation.

Figure 7. Lights indicate a fan speed of 3.

G9956 Heavy-Duty Hanging Air Filter G9956 Heavy-Duty Hanging -12-