Grizzly G9984/G9985 instruction manual Piece Inventory

The Model G9984/G9985 is a heavy machine with a 792 lb. shipping weight. DO NOT over-exert your- self while unpacking or moving your machine – you will need assistance and power equipment. Serious personal injury may occur if safe moving methods are not fol-

lowed.

Make sure floor structure is capable of supporting the combined weight of the machine parts and people.

Some metal parts may have sharp edges on them after they are formed. Please examine the edges of all metal parts before handling them. Failure to do so could result in injury.

Piece Inventory

After all the parts have been removed from the carton, you should have:

•(2) Base Support

•(2) Star Knob M10-1.5 x 15

•(4) Lock Washer 10mm

•(6) Flat Washer 10mm

•(4) Hex Bolt M10-1.5 x 30

•(4) Rubber Foot 1⁄2"-12 x 1

•(1) Sanding Belt 9" x 1381⁄2"

Figure 5. Parts layout.

In the event that any nonproprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them, or for the sake of expediency, replacements can be obtained at your local hard- ware store.

G9984/G9985 Oscillating Belt Edge Sander -9-