Grizzly G9984/G9985 instruction manual Base Supports

Base Supports

Attaching the base supports to the main base:

1.Slide the base supports under the main machine base.

2.Using (4) M10-1.5 x 30 hex bolts, (4) 10mm flat washers, and (4) 10mm lock washers, secure the main machine base to the base supports as shown in Figure 7. Be sure the lock washer is between the hex bolt head and the flat washer when installing.

Bolt Here

Figure 7. Attaching base supports to main base.

G9984/G9985 Oscillating Belt Edge Sander -13-