MODEL H0591 |
MICRO DIE GRINDER |
INSTRUCTION SHEET |
EYE/EAR INJURY HAZARD! Wear safety glasses and hearing protection during use of this tool!
INJURY HAZARD!
Always disconnect tool from
air to prevent unexpected 
operation during service!
EXPLOSION HAZARD! Never exceed 90 PSI!
Only use cutters rated for
56,000 RPM or less!
RESPIRATORY HAZARD! Grinding produces fine dust. Wear the appropriate protection during use!
Figure 1. Model H0591.
Micro die grinder MUST have 3-4 drops of oil directly dropped into the air fitting before each use as shown in Figure 2.
Introduction
This Micro Die Grinder allows extreme flexibility in all kinds of environments.
Inventory |
| |
A. | Micro Die Grinder | 1 |
B. | 1⁄4" NPT Air Fitting | 1 |
C. | Collet Wrenches | 2 |
D. | Oil Bottle | 1 |
Figure 2. Lubricating directly into air fitting.
If you need help with your new pneumatic tool, call our Tech Support at: (570)
Operation
Insert your 1⁄8" tool bit into the collet and tighten with the collet wrenches provided. Make sure the tool you use is rated for 56,000 RPM or less. Connect air fitting to your regulated air source.
COPYRIGHT © MARCH, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#PC8127 PRINTED IN TAIWAN
