INTRODUCTION
Commentary
We are proud to offer the Grizzly Model H2867 Electric Shear. This model is part of a growing Grizzly family of fine power tools. When used according to the guide- lines set forth in this manual, you can expect years of
This shear features a 2.4 amp motor, 5⁄32" width of cut and 4500 strokes/min, cuts up to 1⁄16" mild steel, 3⁄64" stainless steel, is double insulated, 110V and weighs 31⁄2 lbs.
We are pleased to provide this manual with the Model H2867. It was written to encourage safety considerations and guide you through general operating pro- cedures and maintenance. This manual represents our effort to produce the best documentation possible.
The specifications, details, and pho- tographs in this manual represent the Model H2867 as supplied when the manu- al was prepared. However, owing to Grizzly’s policy of continuous improve- ment, changes may be made at any time with no obligation on the part of Grizzly. If you have any comments regarding this manual, please write to us at the address below:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA
Most importantly, we stand behind our tools. If you have any service questions or parts requests, please call or write us at the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570)
Fax: (800)
Web Site: http://www.grizzly.com
Read the manual before assembly and operation. Become familiar with this tool, its safety instructions, and its operation before beginning any work. Serious personal injury may result if safety or operational infor- mation is not understood or followed.
H2867 Electric Shear |
