Grizzly instruction sheet Model H2881, Pneumatic Drum, Sander, Instruction Sheet

MODEL H2881

4" PNEUMATIC DRUM

SANDER

INSTRUCTION SHEET

EYE/EAR INJURY HAZARD! Wear safety glasses and hearing protection during use of this tool!

OVER INFLATION HAZARD!

Never exceed 8 PSI!

RESPIRATORY HAZARD! Sanding produces fine dust. Wear the appropriate protection during use!

Introduction

This rolling-pin style pneumatic drum sander is perfect for hand contouring and smoothing projects that are too large to use with a station- ary sander. Simply chuck the 3⁄8" spindle into a portable electric drill, cordless drill or air powered drill for two-handed control. Choose this 4" x 11⁄8" diameter size for getting into tight areas. Features ball bearing handle and air valve for easy bicycle pump inflation.

Inventory
A.	Drum Sander	1
B.	Spare Valve Cap	1

Operation

Slide the sanding sleeve over the drum. Remove the plastic cap on the handle with a small screw driver to expose the air valve. Inflate to the desired pressure. DO NOT exceed 8 PSI!

Figure 1. Model H2881.

Figure 2. Pneumatic drum sander in action.

4" Aluminum Oxide Sanding Sleeves

H3875 11⁄8" x 4" x 60 Grit

H3876 11⁄8" x 4" x 100 Grit

H3877 11⁄8" x 4" x 150 Grit

H3878 11⁄8" x 4" x 180 Grit

H3879 11⁄8" x 4" x 220 Grit

H3880 11⁄8" x 4" x 320 Grit

If you need help with your new pneumatic tool, call our Tech Support at: (570) 546-9663.

COPYRIGHT © MARCH, 2006 BY GRIZZLY INDUSTRIAL, INC.

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#PC8119 PRINTED IN TAIWAN