Grizzly H2909 instruction manual Operation, Loading Stapler, Depth Adjustment, Operating Stapler

OPERATION

Loading Stapler

To load your stapler:

1.Disconnect the air supply from the stapler!

2.Push the magazine latch in the direc- tion shown in Figure 1.

Figure 1. Releasing magazine latch.

3.Pull back the magazine cover until it stops.

4.Point the stapler up and insert a stick of staples into the magazine as shown in Figure 2. Make sure that the point- ed ends of the staples point in the same direction as the stapler nose piece.

Figure 2. Loading staples into stapler.

5.Push the magazine cover forward until the magazine latch locks in place.

Depth Adjustment

1.Rotate the depth adjustment wheel (shown in Figure 3) clockwise to increase the nail depth.

2.Rotate the finger wheel counter-clock- wise to decrease the nail depth.

Figure 3. Depth adjustment wheel.

Operating Stapler

If you have not read the safety instruc- tions in this manual, do not operate the stapler.

Before you operate your stapler, place one drop of the included oil into the quick con- nect fitting where the stapler connects to the air supply. Fire the EMPTY stapler 3-4 times before beginning, so oil does not come out onto the project during regular operation.

H2909 18 Gauge Stapler Kit -6-