Tuning Machines

To install the tuning machines:

1.Slide the tuning machines through the back of the headstock.

2.Place the washer and barrel nut over the tun- ing post and tighten with a 10mm socket.

Figure 13. Tuning machines installed in the

back of the headstock

Tailpiece

To install the tailpiece:

1.Insert the tailpiece screw through the tail- piece lug.

2.Set the tailpiece on the tensioning hoop, as shown in Figure 14, and tighten the nut against the tailpiece lug.

Tailpiece

Tailpiece Lug

Figure 14. Tightening tailpiece screw into lug.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

-12-

 

 

 

 

 

H3124 Banjo Kit

 

 

 

 

 

 

 

 

 

 

Page 14
Image 14
Grizzly H3124 instruction manual Tuning Machines, Tailpiece, To install the tuning machines, To install the tailpiece