SECTION 6: OPERATIONS
Keep loose clothing rolled up and out of the way of machinery and keep hair pulled back.
!Disconnect power to the machine when perform-
ing any maintenance, assembly or adjust- ments. Failure to do this may result in serious per- sonal injury.
Wear safety glasses dur- ing the entire operation process. Failure to com- ply may result in serious personal injury.
Using this machine pro- duces sawdust which may cause allergic reactions and respiratory problems. Use an approved dust mask to protect yourself from these hazards!
NOTICE
The following section was designed to give instructions on the basic operations of this buffer. However, it is in no way comprehen- sive of every buffer application. There are many different buffing wheels, compounds and attachments available for buffers. WE STRONGLY RECOMMEND that you read books, trade magazines, or get formal train- ing to maximize the potential of your machine.
Test Run
Once mounting is complete and adjustments are done to your satisfaction, you are ready to test the machine. Before testing, remove the flanges and shaft nuts from the arbor. Facing the machine, the
Plug in the power and turn the buffer ON. Make sure that your hand is poised near the switch in case there is a problem. The buffer should run smoothly with little or no vibration or rubbing nois- es. Strange or unnatural noises should be inves- tigated and corrected before operating the machine further.
If you cannot easily locate the source of an unusual noise or vibration, feel free to contact our service department for help.
General
The Model H4380 8" Buffer is strictly designed for buffing operations. IT IS NOT A GRINDER. The absence of grinding wheel guards prohibit the use of this machine as a grinder.
This buffer has a left and right shaft to provide the option of mounting two different buffing wheels, depending on your application. The convenience of having two shafts allows you to mount different textured buffing wheels onto each shaft.
H4380 Buffer
