Grizzly H5626/7 instruction manual Operating Stapler

Operating Stapler	ple in case of deflection. (Deflection is
	caused when the staple changes its
If you have not read the safety instruc-	path, resulting in the staple puncturing
tions in this manual, do not operate the	the surface of the workpiece as
stapler.	shown in Figure 4.)
Every time you operate your stapler, place
one drop of the included oil into the quick
connect fitting where the stapler connects
to the air supply.
To operate your stapler:
1. Connect the air supply to the quick
connect fitting.
2. Test the loaded stapler for proper
	Figure 4. Example of staple deflection.
penetration. Hold the stapler perpen-
dicular to the surface of a piece of	Besides damaging your workpiece,
clean scrap wood that is thick enough	deflection can cause injury if your free
for the length of staples you have	hand is securing the workpiece in the
loaded.	location that the staple deflects.
3. Before pressing the trigger, make	4. Press the trigger. If the staple drove
sure your free hand is positioned out	into the wood far enough, continue
of the way of a potential path of a sta-	with your intended operations. If the
	staple either went too far or not far
	enough, then adjust the air pressure.
	More air pressure will make the staple
	go deeper and less air pressure will
	decrease the staple penetration.

H5626/H5627 Upholstery Stapler -7-